Mocal Oil Cooler Installed

After having a small oil cooler (13 row 115mm matrix) at the side vent and seeing that it is inadequate for track duty (after 3 laps oil temperature would go as high as 125 Celsius) I decided to double the volume of the oil cooler with a Mocal 13 row 235mm matrix oil cooler.
Also, I used a thermostatic sandwich plate meaning that until 80 degrees Celsius oil will not go through the cooler, which helps especially on cold starts in the winter.

Testing of the oil temperature difference regarding the two oil coolers will happen in about a month when the Race Track in Athens will open again.

Rotrex C30-94 New Impeller

The replacement impeller for my C30-94 came in the mail today from
www.superchargerrebuild.com

Reason for this replacement is a former mechanics big mistake to use a wide washer for the return hose (recirculation) of the bov.
Due to vibration, the washer came loose and hit the impeller a few times damaging it.It was still in good working order but I went ahead and ordered a new one for added safety.

Rotrex doesn't supply any parts , so superchargerrebuilds was the only way to go.

I will replace it tomorrow and report here.

 Update: In the last pictures you can see the new impeller installed.Big thanks to Bill from PB Motorsport for helping with this.

Pretty straight-forward to swap the parts, you might need a heat gun for the input shaft for the old impeller to come off.

Be careful not to brake the input shaft or it's bye bye Rotrex. In the final picture you can see the damaged impeller.

Still here..

Well it's been quite a few years without an update..but i'm back with much more stuff to share about the MR2,the Rotrex kit and tuning with the Power FC standalone.Stay tuned for more.

Changing Springs on Coilover Suspension

After installing the Ohlins with the default setup:

Springs: Front : 5kg/mm ( 1kg/mm helper spring )

Rear : 8kg/mm ( 1kg/mm helper spring )

Sway Bars: Front : Whiteline adj/ 22mm

Rear: None

..and testing it at the track ( www.athenscircuit.gr ) i was happy with the overall feel of the car but troubled with the oversteering setup of the car..It was logical though, since the front roll rate with the sway bar (5kg/mm spring+22mm sway) was almost equal with the rear roll rate (8kg/mm spring only). And since there is more weight on the rear of the car,the rear will lose traction first.

So,without thinking it much,i ordered a pair of Hypercoil Springs (11.6kg/mm - 650 lb/in) for the front only,losing also the front sway bar:

So,the suspension characteristic from now on will be:

Springs: Front : 11.6kg/mm ( 1kg/mm helper spring )

Rear : 8kg/mm ( 1kg/mm helper spring )

Sway Bars: Front : None Rear: None

Me and my buddy(team manager :p) Sikrip decided to change them out ourselves since it is not difficult..You can see from the pictures that he did most of the work as i had the work of taking pictures..hehehe! Thanks man!

Ok,now on to the how-to:

First unscrew all the numbered bolts/nuts:

Also,remove these 3 nuts (support/hold the coilover at that time or it will fall):

After you removed all these stuff,just move the coilover in and out to let it out of the suspension knee.

Now you can start changing the spring.

Step A:

Unlock the spring seat rings using your spring perches and move them BOTH all the way down so there is no preload on the springs.If using helper springs(like I am) there will be a slight preload only on the helper but you got nothing to worry about:

Step B:

Most coilovers need an Allen key for dismantling them.Mine though, needed a Torx key T40 to be exact.Hold the top nut secure with a wrench and turn the torx till you separate the parts:

Step C:

Now you have the following parts.The body of the shock,the spring seat,a thick washer that goes between the spring seat and the top mount,the top mount and the top nut.

Take a look of the two springs:

Yellow:5kg/mm and

Blue:11.6kg/mm

Step D:

Reassembly.This goes as follows:Shock boot,helper spring with spring seat,spring,spring seat,thick washer,top mount and screw in the top nut.Then using the Torx key make sure you tighten it all up:

That's about it.On a scale of 1-10 i would say that this is a 4.

Total time for the front suspension was about 2hr with a lot of fun breaks like this one:

Sikrip trying to compress the 11kg spring: hahahaha

And here's me pointing out that he forgot to do something there.. :)

Ohlins PCV installed

Yesterday i received a set of used OHLINS PCV coilovers and today i installed them along with my buddy Sikrip.

Springs: Front : 5kg/mm ( 1kg/mm helper spring )

Rear : 8kg/mm ( 1kg/mm helper spring )

Sway Bars: Front : Whiteline adj/ 22mm

Rear: None

Pictures:

Front installed:

Rear installed:

Beautiful Trackday Video

Beautiful video full of emotions filmed on Megara track nearby Athens:

That's what trackdays are all about.Watch it in HD!

Some pictures there with my MR2:

Rotrex Install

At January 2009 i installed a Rotrex compressor kit by WEB3.0 of www.spyderchat.com
The kit consists of a Rotrex C30-94, Air/Water Intecooler,Siemens Deka 630cc/min injectors,Recirculating Bov,Supra MAF etc..

Pics of the parts:


Rotrex C30-94 w/105mm pulley,Rotrex Oil Canister,SX100 Oil:


Supra MAF Sensor:



Heat Exchanger,Intercooler,Water Pump&Reservoir,Hardware: